MAGNA LATCH VERTICAL PULL MODEL FOR VINYL FENCE

The Vertical Pull Model, also known as the Pet Latch, uses the same revolutionary technology as the Top Pull Model in a smaller, more compact body. It is suitable for mounting on taller pool gates where it will still be out of reach of children, as well as on garden or household gates to provide a safety barrier for pets. Like the Top Pull Model, the Pet Latch offers easy adjustment, is key-lockable for added security and won't disengage from shaking or pulling. Always confirm local fence/barrier regulations before installation.

MAGNA LATCH TOP PULL MODEL FOR VINYL FENCE

The Top Pull Model is designed especially for swimming pool gates but can be installed on any gate where child safety is important. It is designed to extend above the height of the fence to keep the release knob out of reach of children, and is also key-lockable for added safety.Tested to over 400,000 cycles, the Top Pull Model has been independently verified to meet stringent international safety codes, and has also received several prestigious design awards. It incorporates patented 'Lost Motion Technology' which stops the latch from disengaging due to shaking or moving the gate. Installation is simple, with vertical and horizontal adjustment of up to 1 7/16" (37mm) allowing for quick and easy alignment on the gate as well as fine-tuning at any time to accommodate for gate sagging or movement over time. Always confirm local fence/barrier regulations before installation.

MAGNA LATCH SIDE PULL FOR VINYL FENCE

The Magna-Latch Side Pull Model is an inexpensive, general-purpose, magnetic gate latch that offers simple, effective latching for home and garden gates. With a new sleek design, it offers horizontal and vertical adjustment of up to 5/16" (8mm) for quick installation and extends the life of a gate by allowing easy accommodation of gate sagging and movement over time.

MAGNA LATCH SIDE PULL FOR GLASS FOR VINYL FENCE

The sleek lines of a glass pool fence demand a stylish, unobtrusive latch - without compromising at all on safety. Following the tradition of safety, strength and style set by the rest of the Magna-Latch® range, this new model has been specifically designed for use on glass pool gates. When installed on the inside (pool side) of the gate and a sufficient distance from the top of the gate so as to be out of reach of children, the Glass Gate Hardware Kit will keep pool areas secure, and provide added peace of mind for pool owners. Always confirm any safety requirements with the appropriate local pool or safety authorities in your area, as regulations may vary from region to region. Always install the latch in accordance with local fence/barrier regulations.

MAGNA LATCH ROUND POST ADAPTOR KIT FOR VINYL FENCE

The Round Post Adaptor Kit is an optional kit for mounting Top Pull and Vertical Pull models to gates and fences with round posts. The Kit includes adaptor brackets and shims to fit most common chainlink and railing post diameters. Suitable for fence post diameters of 1 7/8" - 2 7/8" (48-73mm) and gate posts from 1 3/8" - 2" (35mm-51mm).

DUPLICATE KEY

Duplicate key for Magna latch.

MAGNA LATCH 2" GAP SPACER FOR VINYL FENCE

The Magna-Latch comes standard with a gate gap variance of 3/8" - 1 7/16". For larger gaps of 1 1/2" - 2", an optional spacer is available. Install the spacer behind the Striker Mounting Plate to ensure proper latch installation and operation.

STEEL INTERNAL FLANGE FOR VINYL FENCE POST

Simple inexpensive deck or wall flange. Low carbon steel hot dipped galvanized 4" or 5" post slides tight over.

MINI MAGNETIC DOOR LATCH FOR VINYL FENCE

Magnetic door latch for ornamental & vinyl gates. Child resistant, key lockable, adjustable height 1" left or right, left or right hand.

STANDARD SIZE MAGNETIC DOOR LATCH FOR VINYL FENCE

Magnetic door latch for ornamental & vinyl gates. Child resistant, key lockable, adjustable height 1" left or right, left or right hand.

VINYL FENCE ADHESIVE

VINYL FENCE ADHESIVE 1/2 OUNCE TUBE

VINYL FENCE SWIVEL HELPER WHEEL

5"X5" helper wheel fastened with 10 screws coated black only.

NEW VINYL FENCE SWIVEL SPRING LOADED HELPER WHEEL

Fastened with 8 screws

DURA CLOSE MULTI-ADJUSTABLE SELF CLOSING HINGE FOR VINYL FENCE

Can be used on 4"x4" or 5"x5" post. this is self closing hinge with tension adjustment nut 1/2" adjustment up or down.

DUAL SIDED KEYED LOCK FOR VINYL FENCE

Keyed on the outside - Safety Child proof on inside. No key required to get out

DELUXE CANE BOLT FOR VINYL FENCE IN BLACK

5/8" Diameter rod 24" long with guides & resting bracket. Keyed entry on both sides right or left.

UNIVERSAL HINGE FOR VINYL FENCE

Fully adjustable 1 1/2" left or right. 1/2" up and down. Minimum space 3/8". Fits all size posts. 5/8" threaded rod. Fastened with 16 matching color stainless steel screws.

UNIVERSAL SELF CLOSING SPRING FOR VINYL FENCE

Used with #59SS and #61SS Hinge. Fully adjustable to the tension desired.

Z-LOKK MAGNETIC LOCK FOR VINYL FENCE GATE

For metal, picket style gates. Available in two models: one to fit gate frames of up to 1 5/8" (41mm) and a longer-bodied model to fit gate frames of up to 2 1/2" (63mm). Proven, reliable D&D magnetic triggering. Installed cost is 50% less than a lock-box. No milling or welding required. Re-keyable 6-pin lock cylinder. Operates and locks from both sides of gate.

DROP ROD WITH GUIDES FOR VINYL FENCE

5/8" Drop rod with guides: 30" long with guides. 5/16" hole provided for padlock.

VINYL FENCE NOTCHER

9" Vinyl Mini Notcher

PVC VINYL FENCE NOTCHING TOOL 18" HEAVY DUTY

Vinyl Notching Tool 18" Heavy Duty PVC Vinyl Notcher is a perfect tool for notching heavy duty post or Rails. Manufactured by VinylFence.org This is a must have for all fence installers and fence dealers. Adjustable Notch detp 3/4" wide and upto 1/4" Deep notch. Changeable notching blades

REPLACEMENT BLADE FOR VINYL FENCE NOTCHING TOOL

Replacement blade for notcher tool.

VINYL FENCE GATE HANDLE

Used to add a touch of class toe ach job. 10" long with screws.

VINYL FENCE GATE LATCH

Use on left or right hand gates. anti-sag design forces gate striker to catch with 1/2" anti-sag adjustment. Install initially in center hole. Positive gate support provides complete upward support on latch side. Fastened on two sides of post or gate with matching stainless steel screws. 1/2" solid stainless striker.

VINYL FENCE GATE HINGE

Fully adjustable 1 1/2" in either direction. Minimum space 3/8". Fits 5" x 5" posts only 5/8" threaded rod. Fastened with 18 stainless steel screws on three sides.

VINYL FENCE RICKY'S KNOCKS

Made of special formulated plastic, will take a severe pounding with 20 lbs. sledge hummer. RICKY'S KNOCK is a new tool to help fence installers install the post in the ground. It can be used for Vinyl Chain link & Omamental fence. When digging a hole go only half of the depth desired, Put post in the hole put Ricky's Knock on top and use sledge hammer to drive post to desired dept. Saves money, time, and cement. (Undisturbed Ground) will hold the post level. The knock prevents any damage.

PLASTIC DIAMOND OPENING FLAT LATTICE FOR VINYL FENCE

4"X8" Diamond 1" Diamond opening plastic flat lattice.

VINYL FENCE POST SUPPORT BRACKET

Post support brackets are made of aluminum. Used on 4"x4" or 5"x5" posts. Used with 1 5/8" O.D. pipe. You no longer need to spend time and labor filling the P.V.C post with cement. Use three or four brackets per post.

VINYL FENCE POST SKIRT

Decorative skirt, when installing vinyl fences on porch-decks-wall mount-stair railing. Sizes available: 4"X1" & 5"X1". Comes in all colors.

VINYL FENCE POST SUPPORT STEEL BRACKET

Hot dipped galvanized formed steel bracket doest he same job as #64 and #65.

PLASTIC SQUARE OPENING FLAT LATTICE FOR VINYL FENCE

Plastic flat lattice 1 3/4" square opening 4"X8" square.

VINYL FENCE ALUMINUM INSERTS

Fits 2"x 3 1/2" & T Rail

VINYL FENCE HEAVY DUTY ROUTER BITS

Heavy duty router bit- End mill carbide bit-built to last

VINYL FENCE ROLLED FORMED ALUMINUM INSERT 16 GAUGE

Fits 2" x 6" and 2" x 7".

4" VINYL FENCE ALUMINUM INSERTS

4"x4" Vinyl aluminum inserts use for gate post-windy locations. 7' - 8' - 9' vinyl fences. Wall or concrete installation.

5"VINYL FENCE ALUMINUM INSERTS

5"x5" Vinyl aluminum inserts use for gate post-windy locations. 7' - 8' - 9' - 10' - 11' - 12' vinyl fences. Wall or concrete installation.

VINYL FENCE POST & FLANGE ADAPTER

Used for deck, gate post & wall installations. Also used for in the ground installation. (Lag screw and sleeve anchor sold separately) Add to #64 or 65 (not included in price). Size: 4"x4"x46" - 4"x4"x58" - 4"x4"x70" - 5"x5"x46" - 5"x5"x58" - 5"x5"x70" - 5"x5"x82" - 5"x5"x94"

PAN HEAD TECH SCREW FOR VINYL FENCE

Pan head tech screw- self drilling- self tapping. #10 x 3/4".

VINYL FENCE RAIL REMOVER

A tool designed to remove notched installed vinyl rails! Simply slide the two stainless steel tabs into the routed hole and voila; slide the rail out! A Miracle!

BOUND RAIL BRACKET SYSTEM FOR VINYL FENCE

Bracket system includes Plastic Face Plate, Zinc Die Cast Base Plate & Screws, Screws are hidden underneath the Plastic Face Plate which make the Bound Rail Bracket System aesthetically pleasing! Bracket base is Die Cast Zinc which provides added strength and safety! Quick Installation. Secure system that wont sag! Trail straight: Includes plastic Face Plate, Zinc Die Cast Base Plate & Screws. Available in white and beige. Size: Plastic Source T-Rail

VINYL FENCE RAIL SYSTEM

Designed the same way as the TRAIL SYSTEM. Can be used as a bottom rail with the TRAIL AS A TOP RAIL OR 2" x 3 1/2" TOP & BOTTOM. Plastic Source 2" X 3 1/2"

VINYL FENCE TRAIL STAIR SYSTEM

Includes Plastic Face Plate, Zinc Die Cast Base Plate & Screws. Stair system sold with COMPLETE SET of Up & Down Brackets. Available in white & beige.

VINYL FENCE STAIR RAIL SYSTEM

Stair system sold with COMPLETE SET of Up & Down Brackets. Plastic Source 2" X 3 1/2".

SCREW COVER

5/8" Screw cover

VINYL FENCE POST ADAPTOR

Additional Rail Components. 22.5 degree or 45 degree post adaptor.

COLUMN ADAPTOR FOR VINYL FENCE

Additional Rail Components. 8" Column adaptor.

VINYL FENCE POSTS .160 WALL POST

5"x5" Vinyl fence posts .160 wall post.

VINYL FENCE POSTS .250 WALL POST

5"x5" Vinyl fence posts .250 wall post.